Product Categories
- professional power amplifier
- switching power amplifier
- professional power amplifier
- high power amplifier
- professional wire microphone
- Moving coil microphone
- Capacitive microphone
- Wired conference system
- professional wireless Microphone
- VHF Wireless Microphone
- UHF Wireless Microphone
- digital wireless conference system
- professional audio signal processor
- in-ear-canalphones monitoring
- antenna distributor
- Feedback exterminator
- effect processor
- sequence controller
- professional audio mixer
- mixer console
- mixer console with built-in amplifier
- professional speaker
- Other audio
Service
Xinchuangmei Electronic
Tel:+86-750-7120889
Fax:+86-750-7120886
E-mail:epxcmkj@163.com
MSN:epxcm@hotmail.com
Add:Enping City, Guangdong ,china
REV100
Effects Processor
Details
Features
◆ Modulus / D converter: 20Hz-20kHz
◆ Dynamic range: 80dB
◆ Total harmonic distortion: 小于0.1%(1kHz)
◆ Modulus / D converter
◆ ADC: 16bit
◆ DAC: 16bit
◆ Sampling Frequency: 44.1kHz
◆ Stored procedures: 99
◆ Effect of procedures: Stereo Reverb, reverb, reverb and portal, delay, delay + reverb
◆ Reverb - Flanger, chorus + reverb, reverb symphony +
Function
◆ Connector: PHONE JACK×2
◆ Normal level: -20dB
◆ Impedance: 20kΩ(Mono:10kΩ)
◆ Export
◆ Connector: PHONE JACK×2
◆ Normal level: -20dB
◆ Impedance: 2kΩ(Mono:1kΩ)
◆Front panel input level control section v, mix
◆balance, delayed attenuation level
◆ Front panel key part: ▲, ,MIDI,storage
◆ LED light-emitting diode display peak around delay, attenuation, level
(can be edited directory)
◆ MIDI input:5-Pin DIN
◆ Power Supply: DC12V
◆ Feet:480×232×45.5mm(18.9″×9.1″×1.8″)
◆ Weight:2.5kg
◆ Modulus / D converter: 20Hz-20kHz
◆ Dynamic range: 80dB
◆ Total harmonic distortion: 小于0.1%(1kHz)
◆ Modulus / D converter
◆ ADC: 16bit
◆ DAC: 16bit
◆ Sampling Frequency: 44.1kHz
◆ Stored procedures: 99
◆ Effect of procedures: Stereo Reverb, reverb, reverb and portal, delay, delay + reverb
◆ Reverb - Flanger, chorus + reverb, reverb symphony +
Function
◆ Connector: PHONE JACK×2
◆ Normal level: -20dB
◆ Impedance: 20kΩ(Mono:10kΩ)
◆ Export
◆ Connector: PHONE JACK×2
◆ Normal level: -20dB
◆ Impedance: 2kΩ(Mono:1kΩ)
◆Front panel input level control section v, mix
◆balance, delayed attenuation level
◆ Front panel key part: ▲, ,MIDI,storage
◆ LED light-emitting diode display peak around delay, attenuation, level
(can be edited directory)
◆ MIDI input:5-Pin DIN
◆ Power Supply: DC12V
◆ Feet:480×232×45.5mm(18.9″×9.1″×1.8″)
◆ Weight:2.5kg